The air quality inside a residential or commercial building may be greatly affected when there is a detected mold environment growing inside, especially when the molds are of the airborne species, as they are a common source of allergen and can be the primary cause of health problems for the building residents, such as sneezing, runny nose, cough, eye irritation, upper respiratory irritation, and, in serious condition, asthma attack. Water leaking constantly in a building and has not been given immediate remedial action for a long period of time may result into dampness in the indoor environment and the existence of mold growth. The natural function of molds is to decompose organic matter, especially matters that are no longer living; therefore, when they are found growing inside a building establishment, their natural function takes an adverse effect on decomposing materials inside the building, such as wood, porous objects, drywalls, and carpets.
As part of a maintenance procedure in a building structure, Lead Inspection Riverside should be regularly performed, to meet up on the following objectives: test for mold growth in the establishment; locate the mold population when there is a positive test result of their existence; identify their specie; and conduct a post-inspection after a remedial action has been performed to eliminate the mold presence.
A mold inspector carries these 5 important steps when he conducts an inspection to a building establishment: interview with the owner or maintenance caretaker; conduct an ocular inspection; take samples; have the samples be analysed; and make the necessary report.
A mold inspector will usually conduct first an interview to get as much information needed for him to conduct his next step of inspection and the information that he will most likely ask are about the humidity condition inside the building, whether there has been a leaking problem existing in the roof or plumbing fixtures, have the occupants smell some kind of moldy odor, or has there been a detected mold population growth inside the structure.
When the inspector receives a positive reporting from the owner or caretaker of mold presence, he performs a visual inspection into the spot areas where there is likely water penetration or evidence of a mold habitat existing, using tools like moisture meters for detecting moisture, hydrometers for measuring the humidity, borescopes for viewing sections of walls, or laser thermometers for checking on the surface temperatures, as well as digital photographs, if the mold presence is detected.
The mold inspector proceeds with the third step of taking air samples, outside and inside the building, using a special air collector device that has the design of specifically collecting airborne mold spores and which can, at the same time, provide conclusive results of the spore counts, giving the inspector an idea if the air quality inside the building is of health risk or not.
A special laboratory analyst handles the given air samples by determining the number of mold spores present per cubic meter of air and, at the same time, analysing the kind of mold specie found in the building.
The last segment in the Mold Inspection Riverside is a documented summary report which consists of the following: photos of the mold presence and its specific locations, population level of mold spores in the air inside the building, the specific mold found, the inspector’s conclusions and strong recommendations in stepping up measures to prevent mold growth, as well as its elimination.